STORM RESPONSE · SEELYVILLE, IN(463) 220-0721
Chalk Line Straight Rows

One Metal Roof, Done Once, in Seelyville

Seelyville Metal Roofing provides metal roofing to homeowners and commercial property owners across Seelyville, from storm damage repairs to full replacements on aging roofs. Licensed and insured in Indiana, we offer free on site inspections and written estimates before any work begins.

If we're busy helping someone else and miss your call, we'll call you back within 15 minutes.

★★★★★
4.92,307+ Google reviews
+A Rating at BBB certificationBest place to work indiana 2025 certificationDuro last Commercial roofing company certificationIKO Premier certificationEmerald pro contractor certification
Quick Answer

Seelyville owners done buying roofs call Seelyville Metal Roofing for the last one: metal installed to spec, documented, and quiet for decades. Call (463) 220-0721.

  • Services: commercial metal roofing, standing seam metal roofing, metal roof repair, metal roof replacement
  • Service area: Seelyville, Vigo County, IN and surrounding areas
  • Response: Seelyville owners reach a project lead directly; active leaks get same priority dispatch
  • Licensed and insured (License #RC21100059)
  • Serving Seelyville, IN since 2018
No Cost, No Obligation

Schedule Your Free Roof Inspection

A metal roof inspection on a Seelyville property is not a five minute look from the driveway. Our crew gets on the roof and works through it panel by panel, checking seams for separation, fasteners for backing out or loose washers, flashings and penetrations for movement, and the finish for chalking, fading, or hail bruising. Everything gets photographed so you can see what we see, whether the roof is on a ranch off Lost Creek Township roads or a commercial building near the SR 42 corridor. Small metal roof problems become expensive ones when they sit, especially after the derecho and high wind seasons that keep rolling through Vigo County. A careful inspection in Seelyville catches the loose fastener or lifted panel edge before it turns into a leak in the ceiling.

Assessment at no charge
Rapid response for active leaks in Seelyville
Licensed (#RC21100059) and fully insured
Insurance claims managed at no extra cost

I agree to be contacted by Seelyville Metal Roofing regarding my inquiry.

Screw down metal across Vigo County lives on a fastener clock. Every Indiana temperature swing walks the panels a fraction against the screws, and after enough cycles the washers crack, the holes wallow out, and the roof that never leaked starts weeping at a hundred points at once. It is not a defect. It is the design reaching the end of its maintenance interval, and most Seelyville owners were never told the interval existed.

Seelyville Metal Roofing tells Seelyville owners when metal over shingles works and when the deck says tear off, because a recover hides whatever it covers for the life of the roof. Deck condition gets probed, existing layers counted, and the honest answer given even when it is the more expensive one to hear. A Vigo County metal roof is a decades decision, and it deserves a foundation somebody actually looked at.

Faded but solid metal on a Seelyville barn or shop? Seelyville Metal Roofing evaluates recoat candidates honestly: which sections carry decades more under a coating system, which need fastener work first, and which have rusted past rescue. Call (463) 220-0721 for the triage. Owners across Vigo County are surprised how often the answer costs a fraction of what they feared.

5,000+
Projects Completed
4.9★
Google Rating
2,307+
Google Reviews
7+
Years Experience
Free
Inspections
Flexible Financing

Payment Options That Work for You

Your Seelyville Metal Roofing project lead will walk you through every financing option during the assessment. Terms in writing, no pressure, no surprise charges.

0%
12 Months
No Interest, No Payments

Pay for your project at a later time, but lock in today's pricing. Ideal for homeowners waiting on insurance settlements.

  • No payments for 12 months
  • No interest if paid in full
  • Lock in current pricing today
0%
12 Months
Equal Payments, No Interest

Divide your project cost equally across 12 months with zero interest. Most homeowners choose this option for predictable budgeting.

  • Equal monthly payments
  • 0% interest for 12 months
  • Simple, predictable budgeting
8.99%
Up to 20 Years
Long-Term Financing

Spread your investment over up to 20 years with fixed equal payments. The right choice for larger projects or homeowners who prefer lower monthly amounts.

  • Up to 20-year terms available
  • Fixed equal payments
  • Ideal for larger projects
Ask About Financing

Financing provided by Regions, Foundation Finance, Slice. Subject to credit approval. Rates, terms, and promotional periods are set by the lender and disclosed in writing before you sign.

Free InspectionManufacturer CertifiedLocal CrewLicensed ContractorDocumentation Done RightTrusted WorkmanshipProperty Owner ApprovedPrompt ResponseFree InspectionManufacturer CertifiedLocal CrewLicensed ContractorDocumentation Done RightTrusted WorkmanshipProperty Owner ApprovedPrompt Response
Professional Services

Seelyville metal roofs, Start to Finish

From inspections and repairs to full replacements and new panel installations, Seelyville Metal Roofing handles every metal roofing project with manufacturer-certified crews and clear documentation.

Commercial Metal Roofing in Seelyville

Metal roofing work on commercial buildings across Seelyville, covering inspection, repair, and full installs on shops, storage buildings, and light commercial structures. We handle panel systems appropriate for commercial roof pitches and spans.

Learn more

Standing Seam Metal Roofing in Seelyville

Installation of standing seam metal roofs on Seelyville homes and buildings, with concealed fasteners and raised seams for long service life. Includes layout, panel run, flashings, and trim.

Learn more

Metal Roof Repair in Seelyville

Targeted repair of metal roofs in Seelyville, including reseating or replacing fasteners, sealing seams, replacing damaged panels, and addressing flashing and penetration issues. Focused on fixing the actual problem, not upselling a full replacement when a repair will hold.

Learn more

Metal Roof Replacement in Seelyville

Full metal roof replacement for Seelyville properties where the existing roof is past its useful life or has taken major storm damage. Covers tear off, deck evaluation, underlayment, new panels, flashings, and trim.

Learn more

Metal Roof Installation in Seelyville

New metal roof installation on Seelyville homes, additions, and outbuildings, from deck prep through finished trim. We handle layout, panel install, and detail work around penetrations.

Learn more

Metal Roofing in Seelyville

General metal roofing services for Seelyville property owners, covering inspection, repair, replacement, and new installs across residential and light commercial properties.

Learn more

Emergency Metal Roof Repair in Seelyville

Prompt response for active problems on metal roofs in Seelyville, including lifted panels, exposed seams, and storm related openings. We prioritize scheduling based on severity and get out to assess and stabilize the roof.

Learn more

Storm Damage Metal Roof Repair in Seelyville

Repair work on Seelyville metal roofs damaged by hail, high wind, or debris. Includes documented inspection with photos, panel and fastener repair or replacement, and written documentation you can provide to your insurance carrier.

Learn more
Aaron Christy founder Seelyville Metal Roofing
Aaron Christy
Founder
About Us

Local Expertise, Real Results

Straight lines on a Seelyville roof come from a layout done on paper first.

Hail season is when Seelyville owners find out what their roof is made of. Class 4 is the top impact class under UL 2218, earned panel by panel through testing, and Seelyville Metal Roofing pairs a Class 4 rated system with the fastening and underlayment details that make the rating mean something. Take the documentation to your agent and ask what your policy does with it.

Seelyville Metal Roofing serves Seelyville and the surrounding Vigo County communities, including Terre Haute, North Terre Haute, West Terre Haute, Riley, and Staunton. Founded in 2018 by Aaron Christy, who has been featured on FOX59, WISH TV, and RTV6, the company has spent years focused on metal roofing across central Indiana. Our crews are local, licensed and insured under Indiana license RC21100059, and familiar with the housing stock you see along the US 40 corridor and the SR 42 stretch through Seelyville. That matters when the roof on your house or shop needs an honest look rather than a sales pitch.

The way we work in Seelyville is straightforward. Every job starts with a thorough on site inspection where the crew walks the metal roof, checks panel seams, fasteners, flashings, and problem areas, and documents everything with photos. From there you get a written estimate with a clear scope, so you know what is being repaired or replaced and why. On the install and repair side, we hold the line on clean workmanship, proper fastener pattern, and correct panel alignment. No inflated add ons, no vague line items, no invented certifications we do not hold.

Our Promise

Three things we commit to for Seelyville property owners. First, a free on site inspection of your metal roof before any work is scheduled or any pressure is applied. Second, an honest written estimate with a clear scope and transparent line items tacked on later. Third, clean workmanship backed by a workmanship warranty alongside the standard manufacturer coverage that applies to the panels and finish. That is the deal, plain and simple.

Why Seelyville Chooses Us

Trusted With Seelyville Metal Roofs, Year After Year

Serving Seelyville and Vigo County with quality materials, thorough inspections, and transparent pricing.

Storm And Hail Response

Vigo County has taken repeated hits, from the June 2023 derecho to hail events across the Terre Haute metro. When storms move through, we prioritize inspections for property owners with visible damage, tarp exposed areas where it is safe to do so, and document everything with photos so nothing gets missed on the claim side.

Local Seelyville Experience

We know the housing stock in Seelyville, from the postwar ranches to the 1970s and 1980s single family homes that make up most of the town. That means we know how these roofs were framed, what pitches we are working on, and what to look for on metal retrofits over older decks. You get advice that fits your actual house.

Full Scope Metal Roofing

From the first inspection through the final walkthrough, one company handles it. Inspection, written estimate, tear off if needed, panel install, flashing and trim, and cleanup. You are not chasing three different contractors, and there is one point of accountability on the finished metal roof.

Insurance Documentation Done Right

On storm damage jobs across Seelyville, we photograph the damage, note the affected panels and fasteners, and provide written documentation you can hand to your insurance carrier. We work with your adjuster on site when helpful. The claim decision stays with your carrier, but the file they see is thorough.

Our Process

A Seelyville Metal Roof, Phase by Phase

The first step for any Seelyville property is the on site inspection. A crew member walks the metal roof, checks panel seams, fasteners, flashings, valleys, and penetrations, and looks for the telltale signs of hail bruising, wind lift, or age related coating wear. Everything gets documented with photos so you can see the condition of the roof yourself. Before any work is proposed, we sit down with you on the scope of what actually needs to happen. No pressure, no upsell on parts of the roof that are still sound.

Next comes the written estimate. You get a clear, itemized document that spells out the scope, the materials, and the price for your Seelyville property, with no vague line items. If the damage is storm related, we help package the photo documentation and notes for your insurance carrier and coordinate with the adjuster during their inspection when that is useful. works with your insurance carrier, and we never name specific carriers or promise a coverage outcome. That decision belongs to your insurance company, and we make sure they have a complete file to review.

Once the scope and estimate are approved, we schedule the work around your calendar and the weather window. The crew shows up on the agreed date, protects landscaping and siding around your Seelyville home or building, and completes the metal roofing work cleanly, whether that is a repair, a panel replacement, or a full install. When the work is done, we walk the property with you, review the finished roof, go over the workmanship warranty, and clean up debris and stray fasteners with a magnetic sweep. You are left with a roof you can trust and a job site that looks better than we found it.

Free Inspection With Photos

Every job starts with a free on site inspection of your metal roof. The crew documents panel seams, fasteners, flashings, and any storm or age damage with photos so you see exactly what we see. No obligation to move forward.

Honest Written Estimate

After the inspection, you get a written estimate with a clear scope and itemized pricing. Transparent line items later, no vague bundles. If a repair will hold, we say so instead of pushing a replacement.

Insurance Documentation

For storm damage jobs in Seelyville, we photograph the damage, write it up, and provide documentation you can hand to your insurance carrier. We coordinate with your adjuster when helpful. works with your insurance carrier, and the coverage decision stays with them.

Clean Work And Walkthrough

When the roof is finished, we walk it with you, review the workmanship, and go over the warranty in plain terms. Debris gets hauled off and we run a magnetic sweep for stray fasteners before we leave.

RESULTS YOU CAN SEE

Recent Seelyville Metal Roofing Projects

3 before-and-after projects documented for the property owner and the property insurance carrier.

BEFORE
Before metal roofing work
AFTER
After metal roofing work
BEFORE
Before metal roofing work
AFTER
After metal roofing work
BEFORE
Before metal roofing work
AFTER
After metal roofing work
Common Causes

What we see most often on Seelyville metal roofs

Seelyville property owners typically call us about these scenarios.

Branch Rub Along a Shaded Slope

Branches touching the roof do not need a storm to do damage. Every breeze drags them across the finish and polishes the coating off in a stripe you can pick out from the yard. Shade over a Seelyville slope keeps the panel damp longer too, which gives the bare metal underneath a head start on rust.

Seam and Sealant Failure

Lap seams and termination details rely on sealant, and sealant is the part that dries out first under Seelyville sun and freeze cycles. The leak rarely shows up where the water gets in, which is why chasing it with caulk from a ladder keeps failing. Seelyville Metal Roofing opens the detail, cleans it, and rebuilds the seal with butyl products made for metal movement.

Hail Dents and Storm Damage

Standing seam sheds most Seelyville hail, but severe events dent flat pans, disturb seams, and crack exposed fastener gaskets across whole slopes. That damage is often insurable when documented correctly. Seelyville Metal Roofing maps every impact with photos, meets the adjuster on the roof, and separates cosmetic dents from functional damage in writing.

Dents That Still Shed Water

Indiana hail peaks in May, then June, then April, and most of what gets reported here is under two inches. On steel that usually means denting rather than a puncture, and a dented panel sheds water the way it did the week before. Many policies now carve out cosmetic damage on metal · Seelyville Metal Roofing photographs every slope and lists cosmetic and functional damage separately.

Metal Laid Straight Over Old Shingles

Going over an old shingle roof with metal can be done right, and it gets done wrong often enough to be worth checking on a Seelyville house that came with the panels already on it. Laid flat with no slip sheet or furring, the backside gets sanded by the granules every time the metal moves, and nobody has seen the decking under two roofs. Slope matters too · snap lock panels need at least a 3:12.

Trim Pulling Loose Along the Rake

Rake trim, ridge cap, and eave trim take the same thermal movement the panels do, joined by laps holding on with butyl tape and a handful of fasteners. Over the years the laps open, the butyl skins over and quits sticking, and a length of trim starts rattling in a west wind. It is not a leak the day it starts. It becomes one when that lap feeds water behind the panel end.

How We Work

Three Simple Steps

From free inspection to project completion, we follow a disciplined process on every Seelyville metal roofing project.

1

Free Inspection

We review your metal roof, document conditions with photos, and explain findings in direct, practical terms. Inspections are scheduled at a time that works for you.

2

Transparent Estimate

A written outline detailing the recommended work and how each item benefits your property. No pressure. We explain options at a comfortable pace.

3

Quality Installation

Crews who work attentively, follow consistent timelines, and respect your property. Manufacturer warranty registration handled in your name.

Client Reviews

Seelyville on Our Warranty Papers

4.9 stars across 2,307+ Google reviews.

★★★★★
2025-09-28

"Quick repair on a panel flashing failure. Got us through hail season. They recommended a full assessment in spring which we have scheduled."

AF
Amanda F.
★★★★★
2025-09-02

"Replaced our 28 year old exposed fastener roof with new standing seam. The cost was higher than a comparable asphalt replacement but the lifetime math made sense given how long we plan to stay. Quality work."

MT
Marcus T.
★★★★★
2025-05-12

"The certifications are real and the work backs them up. Paint and workmanship warranties registered in our name with all documentation delivered."

AK
Andrew K.
★★★★★
2025-11-02

"Easy to work with. Professional crew. Clean job site. Documentation delivered as promised."

CM
Christine M.
★★★★★
2025-05-30

"Asphalt to metal conversion on our home. They handled tear-off, deck repair, and the new standing seam install over four days. Manufacturer warranty in our name."

WB
William B.
Common Questions

The Seelyville Metal Roofing FAQ

Straight answers to the questions Seelyville property owners ask most.

Typically, we get Seelyville property owners on the schedule promptly, with priority given to active storm damage and exposed roofs. If a recent hail or wind event has left panels lifted or seams open, tell us when you call and we will move you up the list. For routine inspections and older roofs that just need an honest look, we set a time that works around your schedule. Call to have it looked at and we will confirm the soonest reasonable window.
It depends on the size of the roof, the pitch, the panel system you choose, and the condition of the deck underneath. Most Seelyville homes with a through fastened exposed fastener panel land in one range, while standing seam systems on the same house typically run noticeably higher because of the material and labor involved. Repairs are much less than a full replacement and depend on how many panels and fasteners are affected. A free on site inspection sets the real number in writing. Schedule the inspection and you get an itemized estimate, not a guess.
It depends on your policy and the cause of the damage. Sudden storm damage from a specific hail or wind event is often covered subject to your deductible, while age related wear, chalking finish, and fasteners that backed out over years usually are not. We photograph and document what we find so your insurance carrier and adjuster have a complete file to work from. The coverage decision belongs to your carrier, and we never bill them directly or name specific companies. Document the damage with photos and call for an inspection.
It depends on the age of the metal roof, the extent of the damage, and how the panels and fasteners are holding up overall. If damage is limited to a few panels, some flashings, and tired fasteners, a targeted repair is usually the honest call. If the finish is failing across the whole roof, fasteners have backed out everywhere, and multiple areas are leaking, replacement makes more sense long term. We will tell you plainly which side of that line your roof sits on. Schedule a free inspection to find out.
In Seelyville, our inspection covers the full metal roof surface, panel by panel. We check seams for separation, fasteners for backing out or failed washers, flashings and penetrations for movement, valleys and eaves for wind damage, and the finish for hail bruising, chalking, and fading. Findings get documented with photos so you see the condition yourself. If any repair or replacement is needed, it goes into a written estimate with a clear scope. Free inspection, no obligation.
Most metal roof repairs on Seelyville homes wrap up in a day, sometimes less depending on the scope. A full metal roof replacement on a typical single family home usually takes a few days from tear off through finished trim, weather permitting. Commercial buildings and larger structures take longer based on square footage and complexity. Weather delays happen and we will communicate any schedule changes up front. Ask during your estimate for a realistic timeline on your specific project.
Most projects carry two layers of coverage. First, a workmanship warranty from us on the installation itself, covering how the panels, fasteners, and flashings were put on. Second, the standard manufacturer coverage that comes with the panels and finish, which varies by product and gauge. We go over both in plain language during the walkthrough so you know what is covered and for how long. Ask for the specifics on your quoted system during the estimate.
In Seelyville, safety first. Stay off the roof and check for visible damage from the ground, including bent or lifted panels, missing trim, dented gutters, and debris on the roof. Document the damage with photos from a safe distance, including any interior water spots on ceilings. Note the date and time of the storm for your records and your insurance carrier. Then call for an inspection so we can get up there, document conditions properly, and give you a written estimate for what needs to happen next.
Indiana Climate

Indiana Weather Affects Metal Roofs Year Round

Indiana sees some of the most varied weather in the country. Seelyville property owners deal with spring hail and severe thunderstorms, summer UV exposure, fall wind storms, and winter freeze thaw cycles. Understanding these patterns is how we plan maintenance, repairs, and replacement work.

Hail Denting Metal Panels

Hail events have been recurring across the Terre Haute metro, with quarter inch to one inch stones reported in Vigo County as recently as March 2025. On metal, hail leaves dents, bruises the finish, and can compromise the protective coating even when the panel still sheds water. When we are called out, we photograph every impact face and note which panels have taken structural damage versus cosmetic hits.

Wind Lifting Panels

Seelyville sits in open west central Indiana plains at about 588 feet, which means prevailing southwest winds hit the rooftops with nothing in the way. High winds work under panel edges, lift seams, and loosen fasteners, especially on older installs. After a wind event we check every edge, ridge, and eave, reseat fasteners where possible, and replace panels that have been compromised.

Thermal Movement And Fasteners

Metal expands and contracts through Indiana summers and winters, and over the years that movement backs fasteners out of the deck. You end up with slightly raised screw heads, cracked washers, and eventually pinhole leaks around each fastener. On older Seelyville metal roofs, we walk the whole field, replace tired fasteners with proper gasketed screws, and reseal where the washers have failed.

Finish And Coating Wear

Older metal roofs across Seelyville show their age through chalking, fading, and coating breakdown along the sun exposed slopes. Once the finish goes, the substrate starts to rust and the panel life clock speeds up. We assess how much coating life is left, whether a recoat is realistic, or whether replacement panels are the more honest call for your budget.

Metal Roofing in Seelyville
Material Guide

Choosing the Right Metal Roof for Seelyville

An honest breakdown of the three panel systems we install most frequently.

Exposed Fastener Panel

The most common metal roof choice for Seelyville homes is a through fastened exposed fastener panel, sometimes called an ag panel or R panel. Owners pick it because the material cost is lower, install goes quickly, and it holds up well on the moderate pitches you see on the postwar ranches around town. It is a solid working class value on a house or a detached shop, and it still delivers a much longer service life than an aging asphalt shingle roof.

Most affordableFast install$$
Stone Coated Steel

A step up in Seelyville is a heavier gauge panel, often 26 gauge or 24 gauge, with an upgraded PVDF or Kynar based finish. The thicker steel resists hail denting better, and the premium coating holds color and fights chalking longer under full sun exposure. It costs more up front, but on a property that took hail damage in the last few years and sits in open country with no tree cover, the durability usually earns its keep.

Shingle lookImpact rated$$$
Standing Seam

A standing seam metal roof is the long life option for Seelyville property owners planning to stay in the home. Concealed fasteners mean no exposed screw heads to back out over time, the raised seams shed water and wind cleanly, and a well installed system can carry a 40 to 50 year service life. The tradeoff is a higher upfront cost and a more involved install, but the total cost of ownership over decades is where it pays back.

Concealed fastenersLongest lifespan$$$$
Local Experience

Serving Every Part of Seelyville

Metal Roofing projects completed across Seelyville's neighborhoods and surrounding areas. Click any neighborhood for the specifics we have learned working there.

Tabertown is a historic unincorporated community that now falls within the boundaries of Seelyville, indicating it predates the town's formal incorporation and likely contains some of the oldest residential structures in the area. View Tabertown metal roofing details →
Lost Acres is a recognized subdivision within the Seelyville ZIP code area, with homes consistent with the town's dominant build era of the 1960s through 1990s. View Lost Acres metal roofing details →
The older residential blocks flanking U.S. Route 40 through central Seelyville represent the town's earliest settled areas, with some housing dating to the early to mid 20th century during the coal and rail era. The flat terrain along this corridor, combined with the proximity to the Lost Creek drainage system, makes these properties susceptible to surface flooding and slow draining conditions following heavy thunderstorms. View Seelyville Core / U.S. Route 40 Corridor metal roofing details →
East Glenn is an unincorporated community situated approximately 1.5 miles west of Seelyville in central Lost Creek Township, and the area is served by restoration contractors dispatching to the broader Seelyville-Terre Haute zone. View East Glenn (adjacent unincorporated area) metal roofing details →
Gospel Grove is an unincorporated community approximately 1.5 miles southwest of Seelyville in Lost Creek Township, within the service area of contractors responding to the greater Seelyville vicinity. The low topographic relief characteristic of this part of Vigo County means water has few natural drainage paths, prolonging saturation and increasing the risk of moisture wicking into foundations and crawl spaces. View Gospel Grove (adjacent unincorporated area) metal roofing details →
Service Area

Where we respond near Seelyville

Indiana-licensed crews dispatched to Seelyville and the closest surrounding communities.

Seelyville
Vigo County
Free inspections · written scopes and photo documentation on every project.
Metal roofing by Seelyville Metal Roofing near Terre Haute, IN
Terre Haute
Vigo County
Same crews, same standards, every Terre Haute project.
Metal roofing by Seelyville Metal Roofing near Crawfordsville, IN
Crawfordsville
Montgomery County
Free comprehensive inspections scheduled in Crawfordsville.
Metal roofing by Seelyville Metal Roofing near Danville, IN
Danville
Hendricks County
Storm damage documented for Danville insurance claims.
Metal roofing by Seelyville Metal Roofing near Bloomington, IN
Bloomington
Monroe County
Written scopes and photo documentation on every Bloomington job.
Metal roofing by Seelyville Metal Roofing near Martinsville, IN
Martinsville
Morgan County
Repairs and full replacements quoted in Martinsville.
Metal roofing by Seelyville Metal Roofing near Plainfield, IN
Plainfield
Hendricks County
Manufacturer-certified crews serve Plainfield.
At a Glance

Metal Roofing Systems Compared in Seelyville

Quick reference for the four metal systems we install most often. Pricing reflects typical Seelyville installations.

Every situation is different. The ranges below reflect typical Seelyville installations. Your project may price lower or higher depending on what our free comprehensive inspection finds. Roof pitch, deck condition, existing layers, access, and material choice all affect the final number.
Standing Seam
Premium long-life residential and commercial
$12-$25+ per sqft
Stone-Coated Steel
HOA-friendly shingle look with metal performance
$10-$18+ per sqft
Metal Shingle
Architectural shingle profile in metal
$9-$16+ per sqft
Exposed Fastener
Ag-commercial, outbuildings, budget residential
$5-$12+ per sqft

Typical Seelyville market ranges as of 2026. The plus sign on upper numbers means your project may exceed the listed maximum based on inspection findings. Get a written scope and quote at no cost.

See the full Seelyville metal roofing pricing guide →
The company behind this site

Seelyville Metal Roofing is powered by Indy Roof & Restoration

The name is the point: Indy Roof & Restoration puts its license, its crews, and its record behind this site. They have been local to central Indiana since 2018, close enough to know Seelyville block by block. That reputation is measurable: 4.9 stars across 2,307+ verified Google reviews and counting.

4.9★
Google rating
2,307+
verified Google reviews
Since 2018
serving central Indiana
5,000+
jobs completed

Licensed and insured · License #RC21100059

They carry Owens Corning Preferred Contractor, Malarkey Certified Contractor, BBB A+ Accredited and Google Google Guaranteed. The company has been featured on FOX59, WISH TV, and RTV6.

From the blog

Helpful guides for Seelyville property owners

Read all articles →

Expert Seelyville Metal Roofing Crews Available Now

Whether a recent storm banged up your panels, your metal roof is showing its age, or you are planning ahead on a Seelyville property, we are ready to take a look. Free on site inspection, no obligation, and we document everything with photos so you have a real file for your claim.

Service area

Serving Seelyville and the surrounding area

Call NowGet Quote
Roof emergency in Seelyville? Tap to call (463) 220-0721